Last Minute Crafting

Some craft projects are thought about long and hard and executed after hours of hard work and creative problem-solving.  Others are created out of an immediate need.  This is one of those projects.

I came home the other day and it was particularly stuffy in the apartment.  You see, we have only one window in the living room and this gorgeous double door out to the deck.  However, the door doesn't have a screen, so if you want to open the door to let in a breeze but don't want to let in the bugs, it is nearly impossible.  And thus instant craft time ensued.

Have you ever seen those insta screen doors?  Like this one.  Well, it gave me an idea...so I gathered supplies and got to work.

I actually ended up not using the cardboard, but forgot to retake the picture.  It was a pretty simple project with a pretty simple idea.  Plus it was the best kind of project because it used things I already had around the house, including some leftover nylon screening.

* Cut screening the length of the door plus about six inches.
* Fold over the top 3" to create a casing, and stitch.  I decided to use some fun embroidery floss to add some interest.

* Slide the tension rod through the casing and adjust to fit at the top of the door.

You can also create a casing at the bottom of the screen and slide in some cardboard, weights, or anything you can think of to weigh the bottom down.  I left enough extra at the bottom to do just this, but I was desperate for some cool air and decided to add that feature later.

Somehow I got lucky enough that the screening we had was the exact width of the doorway.  Not sure how that happened, but I sure am glad it did!  If your screen is too wide, just trim it down a bit before you start.  You want to make sure it will fit from side to side with a bit of extra to close any gaps.  Now, this does not work for keeping cats in or out (it took Annie about 2 minutes to figure out if she headed to the corner she could just push it back).  However, that might change depending on what we use to weigh it down.  But it did significantly cut down on the house flies and flying insects that came into the house.

So, yay for instant crafts, a cooler house, and a project using nothing but found supplies!!!



Have you done any instant crafts lately?  Become so desperate you just have to finish a project right now?  Or just any home improvements?  Or, in our case, removable apartment improvements? 

The Story of a Tank Dress

My sister Emily posted a link on my Facebook to a blog she thought I would like...well, as usual, she was right.  Not only did I immediately fall in love with, and make, the tutorial she linked to, but I spent a good portion of tonight reading all the way to the beginning!  What was this wonderful blog and tutorial my sister sent me, you may ask?  Sweet Verbena, right here on Blogger.  Katy has some great tutorials, plus an adorable puppy that I sort of covet...he looks like Josephine, only a dog :-)

The tutorial Emily sent me was for Katy's tank-top turned dress, you can find it here.  Now, I forewarn, this is not a tutorial, it is simply a few pictures showing you how it went when I followed Katy's tutorial.  If you want the real thing, click on over to Sweet Verbena.

Here is the fabric, and the tank top I used.  They made for a nice combination.

I followed along carefully and cut my tank top, sewed the elastic to the bottom, cut the fabric, and cut out the pockets...see...

It's a little blurry, but you get the idea.  I was surprised at how easy doing the pockets were.  I don't know why I always assumed pockets would be difficult, they aren't...at all.

Next, it was time to sew the skirt portion together.  It looked a little funny lying on the floor...

But it turned out just how it was supposed to!  Next I gathered it at the top and stitched it to the tank top.  I had Jessica try it on before I ironed it, it was sort of funny because the freshly gathered skirt before ironing made it REALLY poofy at the seam and it gave Jessica a very odd shape.  Luckily, after some ironing it looked pretty good.  Here's Jessica's finished tank dress.

I think I just may have to make one for myself!  As with all tutorials, I learned something about my own materials and how you sometimes have to adjust what you are doing based on slight differences.  For instance, since ribbed tank tops have much more built in stretch, I should have made the elastic piece around the bottom a little larger to make it even easier to get on and off.  Oh well, at least it still fit!


Have you discovered a new blog lately?  Saw something you just had to create right then?  Or just shared some inspiration with family?

Door To Table To Art

Our latest DIY project for the apartment is finally finished!  It took a long time, and a lot of scattered afternoons to get it done, but it was well worth the time and effort.  We now have a door transformed to both a table and a piece of artwork.

You see, last winter an 1850s era carriage house collapsed next to our old apartment building.  It was owned by our landlord and we were given the go a head to salvage a few things if we would like (obviously done after the city had demolished the building so it was safe to be around).  We had always loved the look of old doors and thought this would be a great opportunity to salvage one...so we did.  Here is the door before a lick of work was done.

Okay, that is slightly misguided...we'd already removed the old hardware, which was a long project on its own due to the insane amount of rust.

For almost a year the door lived on the back porch of our old apartment building until we moved to our new place and had to decide whether or not to bring it along.  You see, it is a rather giant, heavy, solid door.  After doing some thinking, we decided it would make a nice table that we could set up whenever we needed it but not have to keep up at all times (we don't usually have reasons to sit at a table that seats 6-8 people). 

Once the nice weather finally hit, we were able to get started.  We started by doing a lot of reading about refinishing old painted surfaces, since there is always a chance that the paint may contain traces of lead.  So, no worries, we took the necessary precautions while doing the work.

First we sanded the door.  We didn't bother to get all of the paint off, there were quite a few various layers, but we got most of it off so it would not flake.

We left more paint on the side that would be the "art" side and less on the "table" side.

After all of the sanding, it was time to coat it.  We decided on a clear polyurethane coating so the natural color of the wood would shine through, rather than using a stain/polyurethane combination.  We carefully wiped down the door of all leftover sanding dust and loose paint chips and then started coating it.  This process took an excessive amount of time as it kept raining, causing us to do one coat on one side and then bringing the door in after drying, rather than putting on the second coat (we did two coats on each side). 

The next major piece of the table puzzle was to secure a piece of acrylic to the table surface in order to create a nice and smooth surface for eating.  We did some careful reading about cutting down, drilling starter holes, and screwing into acrylic as we definitely did not want to crack it.  We learned that you should go slow and spritz the drill bit or screw with cold water to keep the heat of the work from melting the acrylic.

When we finally finished, we sat it on top of its saw horse legs (that we had previously attached some grippers to so the top wouldn't slide around), and this is how she looked.

It is a little difficult to see the actual door under the acrylic as the sun was in just the wrong spot.  Ah well, you get the idea (we'll post another picture on a less glaring day).  Here's a picture of the "art" side of the door.

It is leaning up against one of the closets in the office.  The closet holds the folding chairs for the table and the saw horse legs...so the door doesn't block anything that we typically need access to, which is nice!

Have you finished a long project lately?  Taken anything from one thing to something entirely different? 

A Little Bit of Gardening

Well, summer is off to a great start!  I spent over a week visiting family in Illinois, which means I can finally show you some of the birthday presents I made for my niece...but more on that later.  I wanted to share this quick post about my spring/early summer gardening adventure.  I took some of these pictures a while back and thought it was about time I post them.

It all started back in March when I was inspired by this post at Young House Love.  I thought, hmmm...maybe I should try starting our herbs from seeds this year.  So, I went out and picked up an indoor greenhouse and a few different herbs that we tend to use on a regular basis.  It was sort of nice to see a little bit of spring start to sprout in our very cold Connecticut apartment.

By May they were ready to be re-planted outside...

We had the starts of Rosemary, Parsley, Basil, Oregano, Lavender, and Cilantro for our little herb garden...plus Catnip to draw our curious baby cats away from the other herbs!  We planted them each in their own little pot, and also picked up a few flowers to plant.  Now, this being my first independent container-gardening adventure, I encountered a few bumps along the way.  Well, actually one major bump, but it was entirely fixable.

After a few weeks of spring rains, I realized that the large pot of flowers was looking like this...

Not good!  Obviously I had a bit of a drainage problem.  So, I went about on a rescue mission to save my drowning flowers.  After buying some much needed supplies, including rocks for the bottom of the planter, I was ready to tackle the water problem.  With a trusty turkey baster (that later went through the dish washer twice...just to make sure), I was able to siphon off most of the standing water, retrieve my drowning plants, and start all over again.  Now, don't worry, I didn't just throw the sopping wet soil aside, I just redistributed it over some already existing flowerbeds in the yard where it could slowly dry out.

As I was checking everything out to see what all was contributing to the problem (aka...was I just a bad beginning gardener, or was the pot also working against me), I turned the planter over and found this...

That's right, a large planter with two...count them two drainage holes!  Luckily this was easy to fix and after about 2 minutes with my handy drill I had this...

A large planter with 17 drainage holes.  Much better.  I proceeded to fill the bottom of the planter with rocks and replant my flowers.

You can see the freshly planted herbs in the background.  I did end up losing a few of my small white edge flowers.  I think they had been too far gone when I discovered the problem and didn't survive the transplanting.  However, most things made it and I think they are looking pretty good right about now.

Here is a view of the deck container garden as of a few days ago.

 The flowers are all blooming and the herbs are doing great!  And yes, the catnip is at the bottom of the stairs so the baby cats can get to it easily.  Everything started off just sitting in a clump on this side of the deck (it gets the most sun), but we wanted to change it up a little.  We went hunting and found the crate and the stairs hanging around the apartment unused, so Jess decided this would be a perfect use for them.  And judging from this picture, not only was she right, but also it might be about time to make some pesto!

Have you done any container gardening?  Did you have instant success or end up on a learning curve like me?  Or just re-purpose anything from around the house lately?